Skip to content

CH4x4 Small Push Switch for Toyota – Ditch Lights Symbol

$23.98

This Toyota Ditch Lights switch is the CH4x4 DITCH5 design, SKU CH4X4-TOY-DITCH5-SML. Its 32.5 × 22 mm matte black face carries a laser-etched legend and dual LEDs. Check the listed vehicle mounting application; 12V 3A ON/OFF operation requires a fused relay.

This Toyota Ditch Lights switch is the CH4x4 Small Push model identified by SKU CH4X4-TOY-DITCH5-SML. It gives a suitable lighting-control installation a marked panel position, with an OEM-style face and the design shown in this product’s gallery.

Toyota Ditch Lights control: DITCH5 selection

Use the SKU to distinguish this model from other listings that share the Ditch Lights name. The marking is laser etched into a matte black hard face. The body is made from heavy-duty ABS, and the face measures 32.5 × 22 mm, approximately 1.28 × 0.87 inches.

Confirm the mounting location

Check your available opening against the listed applications to maintain a factory look. Tacoma fitment is restricted to the center console. For vehicles listed with ON, verify the exact year and switch space before purchase.

  • Toyota Tacoma 2012–2023 (Center Console ONLY)
  • Toyota Tundra 2008–2021
  • Toyota 4Runner 2010–2024
  • Toyota Land Cruiser Prado 150 Series 2010–2014
  • Toyota Land Cruiser 200 Series 2008–2013
  • Toyota Sequoia 2008–ON
  • Toyota Corolla 2006–2013
  • Toyota Highlander 2008–ON
  • Toyota RAV4 2008–2012
  • Toyota Yaris 2008
  • Toyota Camry 2011–2014

Switch action and electrical limits

The electronic Single Pole Single Throw ON/OFF switch is rated at 3A at 12V, with short circuit protection. The accessory MUST be wired through a fused relay in ALL cases.

Follow the supplied diagram for the button and the lighting equipment’s instructions for the load circuit. The Toyota Ditch Lights mounting application does not establish a direct harness connection or change the lamp-load requirements.

How the two LEDs operate

The upper LED is ON when the button is pressed IN. The lower LED can be connected to a separate dash-light circuit. The illumination indicates the switch position and panel location, not a measurement of the connected lights.

Supplied components

The package contains one Toyota Small Push ON/OFF switch and one connector with cable. A wiring diagram is supplied. Lamps and a fused relay are not listed as included with SKU CH4X4-TOY-DITCH5-SML.

Browse the Small Push collection for alternative legends. Refer to the relevant Toyota owner’s manual for original vehicle-control information.

Weight 2 oz
Dimensions 5 × 5 × 3 in
Switch Action

On-Off

Vehicle

Toyota

Switch LED Color

Amber, Blue, Green, Red, White

Switch Type

Square Push

Function

On-Off

Voltage

12V 3A (Push Toyota)

Compatibility

OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Ditch Lights Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.

You Might Also Need