CH4x4 Small Push Switch for Toyota – Zombie Lights Symbol 2

$23.98

Zombie Lights Symbol 2 provides an alternative graphic for your accessory-lighting button. A laser-etched matte black face, dual LEDs and a 32.5 × 22 mm format coordinate with an OEM-style panel. Rated 12V 3A; connect the accessory through a fused relay.

Switch LED Color

Clear

Description
Additional information

Zombie Lights Symbol 2 is the alternative design choice for a clearly marked lighting-control position. Use the product gallery to choose the artwork you prefer; this version retains the published Small Push electrical specifications rather than adding a different lighting function.

Choosing Zombie Lights Symbol 2

The matte black hard face and heavy-duty ABS body provide a factory look. The legend is laser etched directly into the face, which measures 32.5 × 22 mm, approximately 1.28 × 0.87 inches.

Compare the intended switch location with the vehicle list below before planning the wiring. Matching the mounting opening does not establish compatibility with every existing accessory harness.

Two LEDs, two illumination roles

The upper LED is ON when the button is pressed IN. The lower LED may be wired to a separate dash-light circuit, following the supplied diagram. The upper indication concerns switch position, not confirmation that connected lights are operating.

Electrical requirements

This is an electronic Single Pole Single Throw ON/OFF switch rated at 3A at 12V, with short circuit protection. The accessory MUST be wired through a fused relay in ALL cases.

Check the connected equipment’s load and wiring instructions separately. The symbol selection does not change the switch rating or remove the relay requirement.

Compatible with Toyota mounting applications

The Tacoma application is center console only. Verify the year and switch opening for all models.

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–2014
Toyota Corolla 2006–2013
Toyota Camry 2011–2014

Parts supplied

The package includes one Small Push ON/OFF switch and one connector with cable. A wiring diagram is supplied. Zombie Lights Symbol 2 identifies the switch artwork; a lamp kit and relay are not listed package contents.

Find coordinating designs in the Small Push range. Original vehicle-control information is available in the appropriate Toyota owner’s manual.

Weight	2 oz
Dimensions	5 × 5 × 2 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Zombie Lights Symbol 2 is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.