Skip to content

CH4x4 Small Push Switch for Toyota – COVID-19 Killer Symbol

$23.98

COVID-19 Killer is the novelty legend on this CH4x4 Small Push switch, not a health or disinfection function. The OEM-style 32.5 × 22 mm control features a matte black face, dual LEDs and 12V 3A ON/OFF operation for listed Toyota applications, with a fused relay required.

COVID-19 Killer is the novelty design name for this CH4x4 accessory switch. The laser-etched legend adds a themed detail to a matte black, factory-look panel. It does not indicate any ability to prevent illness, kill viruses or disinfect the vehicle.

What the COVID-19 Killer design includes

Behind the themed face is a 12V 3A electronic switch with short circuit protection. It provides Single Pole Single Throw ON/OFF operation for a properly wired accessory circuit. Choose the legend as a design preference, then identify the circuit’s actual purpose clearly for anyone who will use the control.

The hard face and heavy-duty ABS construction have a matte black finish. One upper LED illuminates when the switch is pressed IN; one lower LED can be connected to a separate dash-light circuit. The supplied wiring diagram describes the switch connections.

32.5 × 22 mm Small Push format

The stated dimensions are 32.5 × 22 mm, or approximately 1.28 × 0.87 inches. Compare the intended opening with this format before ordering. An OEM-style appearance is not a substitute for checking the vehicle application and mounting position.

Compatible with Toyota applications listed

  • Toyota Tacoma 2012–2023 (Center Console ONLY)
  • Toyota Tundra 2008–2021
  • Toyota 4Runner 2010–2024
  • Toyota Land Cruiser Prado 150 Series 2010–2014
  • Toyota Land Cruiser 200 Series 2008–2013
  • Toyota Sequoia 2008–ON
  • Toyota Corolla 2006–2013
  • Toyota Highlander 2008–ON
  • Toyota RAV4 2008–2012
  • Toyota Yaris 2008
  • Toyota Camry 2011–2014

For listings marked ON, confirm your exact model year and switch opening before ordering.

For Tacoma, the application is Center Console ONLY. Retain that location restriction when planning a row of accessory controls.

Wiring and package contents

The accessory MUST be wired through a fused relay in ALL cases. Select the relay, fuse and load wiring for the accessory being controlled, and follow the supplied switch diagram. The package contains one Small Push switch and one connector with cable, with the wiring diagram supplied.

Compare other labels in the Small Push Series if a literal accessory name would better suit your panel. The Biohazard Lights design is another themed option with its own legend. For information about existing vehicle controls and their locations, consult the appropriate Toyota owner’s manual before finalizing your layout.

Weight 2 oz
Dimensions 5 × 5 × 3 in
Switch Action

On-Off

Vehicle

Toyota

Switch LED Color

Amber, Blue, Green, Red, White

Switch Type

Square Push

Function

On-Off

Voltage

12V 3A (Push Toyota)

Compatibility

OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – COVID-19 Killer Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.

You Might Also Need