Skip to content

CH4x4 Small Push Switch for Toyota – Ditch Lights Symbol

$23.98

Identify your ditch-light circuit with the Ditch Lights Symbol design, SKU CH4X4-TOY-DITCH3-SML. A 32.5 × 22 mm matte black face, laser-etched legend and dual LEDs suit an OEM-style panel. Rated 12V 3A ON/OFF; the accessory requires a fused relay.

The Ditch Lights Symbol push switch provides a dedicated control for a suitable auxiliary lighting circuit. This listing is identified by SKU CH4X4-TOY-DITCH3-SML, helping distinguish it from other ditch-light designs with similar product names.

Ditch Lights Symbol circuit planning

Check the connected lighting equipment’s requirements before wiring the button. The electronic Single Pole Single Throw ON/OFF switch is rated at 3A at 12V and includes short circuit protection.

The accessory MUST be wired through a fused relay in ALL cases. Use the supplied switch diagram alongside the lamp manufacturer’s instructions. Lamp current should not be routed directly through the Small Push button merely because the lights use a 12V supply.

Illumination and switch position

The upper LED turns ON when the button is pressed IN. The lower LED can connect to a separate dash-light circuit. These indicators belong to the switch; they do not measure light output or confirm that a lamp is working.

DITCH3 face and body

The face measures 32.5 × 22 mm, approximately 1.28 × 0.87 inches. A heavy-duty ABS body and matte black hard surface give an OEM-style factory look. The Ditch Lights Symbol legend is laser etched into the face.

Compatible with Toyota mounting locations

Verify the model year and switch opening. Tacoma uses the center-console position only. For entries marked ON, confirm the exact year and available space.

  • Toyota Tacoma 2012–2023 (Center Console ONLY)
  • Toyota Tundra 2008–2021
  • Toyota 4Runner 2010–2024
  • Toyota Land Cruiser Prado 150 Series 2010–2014
  • Toyota Land Cruiser 200 Series 2008–2013
  • Toyota Sequoia 2008–ON
  • Toyota Corolla 2006–2013
  • Toyota Highlander 2008–ON
  • Toyota RAV4 2008–2012
  • Toyota Yaris 2008
  • Toyota Camry 2011–2014

Package and design selection

The package includes one Toyota Small Push ON/OFF switch and one connector with cable, with a wiring diagram supplied. Lamps and a fused relay are not listed as included. Match SKU CH4X4-TOY-DITCH3-SML and the product gallery to the design you want.

Explore the Small Push lighting controls for coordinating buttons. Consult the relevant Toyota owner’s manual for original vehicle-control information.

Weight 2 oz
Dimensions 5 × 5 × 3 in
Switch Action

On-Off

Vehicle

Toyota

Switch LED Color

Amber, Blue, Green, Red, White

Switch Type

Square Push

Function

On-Off

Voltage

12V 3A (Push Toyota)

Compatibility

OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Ditch Lights Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.

You Might Also Need