Skip to content

CH4x4 Small Push Switch for Toyota – Twin Air Compressor Symbol

$23.98

Mark your compressor-control position with the Twin Air Compressor Small Push design. The matte black 32.5 × 22 mm face includes a laser-etched legend and two LEDs. This 12V 3A electronic switch requires a fused relay and a compatible compressor-control circuit.

The Twin Air Compressor switch identifies a dedicated compressor-control position in an OEM-style accessory panel. Its legend describes the intended control label; the switch does not supply compressed air, include a compressor or increase the capacity of the connected equipment.

Planning a Twin Air Compressor installation

Check the compressor manufacturer’s control-circuit instructions first. The electronic Single Pole Single Throw switch has a 3A rating at 12V and short circuit protection. In ALL cases the accessory MUST be wired through a fused relay.

Do not connect compressor motor current directly through the Small Push button. The name on the face also does not imply two independently switched outputs: the published arrangement is Single Pole Single Throw.

Panel lighting and switch position

The upper LED is ON when the switch is pressed IN. A lower LED can be wired to a separate dash-light circuit. Use the supplied wiring diagram to identify these connections; the upper indicator is not an air-pressure gauge.

Physical specifications

A heavy-duty ABS body supports the matte black hard face. The Twin Air Compressor legend is laser etched into the surface. Face dimensions are 32.5 × 22 mm, approximately 1.28 × 0.87 inches, for a factory look in the appropriate opening.

Compatible with Toyota mounting locations

Check the model year and opening before purchase. Tacoma installation is center console only. For entries marked ON, confirm your exact year and available switch space before ordering.

  • Toyota Tacoma 2012–2023 (Center Console ONLY)
  • Toyota Tundra 2008–2021
  • Toyota 4Runner 2010–2024
  • Toyota Land Cruiser Prado 150 Series 2010–2014
  • Toyota Land Cruiser 200 Series 2008–2013
  • Toyota Sequoia 2008–ON
  • Toyota Corolla 2006–2013
  • Toyota Highlander 2008–ON
  • Toyota RAV4 2008–2012
  • Toyota Yaris 2008
  • Toyota Camry 2011–2014

Box contents and planning references

The package contains one Toyota Small Push switch and one connector with cable, with a wiring diagram supplied. Compressor equipment and a fused relay are not listed as included.

Browse the Small Push control range for other accessory labels. The relevant Toyota owner’s manual provides information about original vehicle controls.

Weight 2 oz
Dimensions 5 × 5 × 3 in
Switch Action

On-Off

Vehicle

Toyota

Switch LED Color

Amber, Blue, Green, Red, White

Switch Type

Square Push

Function

On-Off

Controls

Compressor

Voltage

12V 3A (Push Toyota)

Compatibility

OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Twin Air Compressor Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.

You Might Also Need