CH4x4 Small Push Switch for Toyota – Interior Lights Symbol

$23.98

Give a suitable cabin-lighting circuit its own Interior Lights button. The laser-etched 32.5 × 22 mm face, matte black finish and two LEDs coordinate with a factory-look panel. This 12V 3A ON/OFF control requires a fused relay.

Switch LED Color

Clear

Description
Additional information

The Interior Lights push switch provides a recognizable control for a suitable cabin or interior accessory-lighting circuit. A dedicated legend helps distinguish these lights from exterior lighting and general accessory-power buttons.

Interior Lights control options

This model provides ON/OFF switching. It does not provide dimming, a timer or a door-trigger interface. Check the intended lighting controller or harness before connecting the button to an existing interior-lighting arrangement.

Published specifications

Electronic Single Pole Single Throw ON/OFF switch, rated at 3A at 12V.
Short circuit protection.
Heavy-duty ABS body and matte black hard face.
Laser-etched legend.
Face size: 32.5 × 22 mm, approximately 1.28 × 0.87 inches.

The accessory MUST be wired through a fused relay in ALL cases. Use the supplied switch diagram and the connected equipment’s instructions to plan the relay and load circuit.

How the LEDs work

The upper LED turns ON when the switch is pressed IN. The lower LED can connect to a separate dash-light circuit. That lower connection concerns the button’s illumination; it should not be confused with the interior lamps being controlled.

Compatible with Toyota mounting applications

Confirm the year and opening for an OEM-style factory look. Tacoma fitment is center console only. Check the exact year and switch space for entries marked ON.

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–ON
Toyota Corolla 2006–2013
Toyota Highlander 2008–ON
Toyota RAV4 2008–2012
Toyota Yaris 2008
Toyota Camry 2011–2014

Package and panel planning

The package includes one Small Push ON/OFF switch and one connector with cable, with a wiring diagram supplied.

Lamps, a lighting controller and a fused relay are not listed as included. Place the Interior Lights control where its purpose is clear alongside your other accessory buttons.

See the Small Push lighting-control range for coordinating legends. The relevant Toyota owner’s manual describes the original vehicle’s interior-lighting controls and operation.

Weight	2 oz
Dimensions	5 × 5 × 3 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Interior Lights Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.