Skip to content

CH4x4 Small Push Switch for Toyota – Fridge Freezer Symbol 2

$23.98

Identify your fridge circuit with the Fridge Freezer Symbol 2 legend in a matte black, factory-look button. The 32.5 × 22 mm Small Push switch features dual LEDs and 12V 3A SPST ON/OFF operation for the listed Toyota applications; use a fused relay and retain the appliance’s own temperature controls.

Fridge Freezer Symbol 2 labels the accessory circuit for your refrigeration setup. This CH4x4 Small Push switch offers an OEM-style matte black face, keeping the control visually coordinated with the vehicle’s panel while giving it a specific, laser-etched legend.

Fridge Freezer control with a defined purpose

The switch supplies ON/OFF control for a relay circuit. It is not a thermostat, a temperature selector or an appliance battery-protection module. The connected fridge or freezer retains its own operating controls and electrical requirements.

Symbol 2 identifies this artwork selection. Review the product image when choosing the legend, and check how the button will be labeled alongside your other accessory circuits.

What comes with the switch

The package contains one Small Push ON/OFF switch and one connector with cable. A wiring diagram is supplied to show the switch connections. The accessory MUST be wired through a fused relay in ALL cases; select the relay, fuse and load wiring for the connected appliance.

Technical details

  • 12V 3A electronic switch with short circuit protection.
  • Single Pole Single Throw ON/OFF action.
  • Heavy-duty ABS and a matte black hard face.
  • Laser-etched Fridge Freezer legend.
  • Upper LED illuminates when pressed IN.
  • Lower LED can connect to a separate dash-light circuit.
  • Face size: 32.5 × 22 mm, approximately 1.28 × 0.87 inches.

Compatible with Toyota models below

Compare the intended opening with the Small Push face size, then verify the vehicle year. Tacoma fitment is limited to the center console.

  • Toyota Tacoma 2012–2023 (Center Console ONLY)
  • Toyota Tundra 2008–2021
  • Toyota 4Runner 2010–2024
  • Toyota Land Cruiser Prado 150 Series 2010–2014
  • Toyota Land Cruiser 200 Series 2008–2013
  • Toyota Sequoia 2008–2014
  • Toyota Corolla 2006–2013
  • Toyota Camry 2011–2014

Plan a readable accessory panel

Check which circuits need separate labels before completing the layout. The Small Push Series offers other accessory legends in this family, and the relay with 5-pin harness listing provides specifications to review for the installation.

Consult the appropriate Toyota owner’s manual for original vehicle controls. Use the supplied switch diagram and the appliance’s instructions when planning the Fridge Freezer circuit and its power connection.

Weight 2 oz
Dimensions 5 × 5 × 2 in
Switch Action

On-Off

Vehicle

Toyota

Switch LED Color

Amber, Blue, Green, Red, White

Switch Type

Square Push

Function

On-Off

Voltage

12V 3A (Push Toyota)

Compatibility

OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Fridge Freezer Symbol 2 is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.

You Might Also Need