Skip to content

CH4x4 Small Push Switch for Toyota – Fog Lights Symbol

$23.98

The Fog Lights Symbol 2 listing carries SKU CH4X4-TOY-FOGL3-SML. Use this OEM-style Small Push button to identify a suitable fog-light control circuit. Its 32.5 × 22 mm laser-etched face includes two LEDs; 12V 3A ON/OFF operation requires a fused relay.

The Fog Lights Symbol 2 Small Push listing provides a marked button for a suitable auxiliary fog-light circuit. Its product SKU is CH4X4-TOY-FOGL3-SML, so compare that identifier and the product gallery when choosing between similar legends.

Fog Lights Symbol 2 circuit planning

Check the lights and harness before deciding how to connect the control. The accessory MUST be wired through a fused relay in ALL cases. Follow the supplied switch diagram and the connected equipment’s instructions; a 12V supply does not mean the full lamp load should pass through this button.

Published specifications

  • Electronic Single Pole Single Throw ON/OFF switch, rated at 3A at 12V.
  • Short circuit protection.
  • Heavy-duty ABS body and matte black hard face.
  • Laser-etched legend.
  • Face size: 32.5 × 22 mm, approximately 1.28 × 0.87 inches.

The upper LED turns ON when the button is pressed IN. The lower LED can be connected to a separate dash-light circuit. These illumination functions indicate the switch position and panel location; they do not confirm lamp operation.

Compatible with Toyota mounting applications

Verify the year and opening for a factory look. Tacoma fitment is center console only. For entries marked ON, confirm the exact year and available switch space.

  • Toyota Tacoma 2012–2023 (Center Console ONLY)
  • Toyota Tundra 2008–2021
  • Toyota 4Runner 2010–2024
  • Toyota Land Cruiser Prado 150 Series 2010–2014
  • Toyota Land Cruiser 200 Series 2008–2013
  • Toyota Sequoia 2008–ON
  • Toyota Corolla 2006–2013
  • Toyota Highlander 2008–ON
  • Toyota RAV4 2008–2012
  • Toyota Yaris 2008
  • Toyota Camry 2011–2014

What comes with the control?

The package includes one Small Push ON/OFF switch and one connector with cable, with a wiring diagram supplied.

Fog lamps and a fused relay are not listed package contents. The Fog Lights Symbol 2 designation identifies this catalog listing; use the SKU above to identify the product record.

Explore the Small Push series for adjacent lighting controls. Consult the relevant Toyota owner’s manual for original vehicle-control information.

Weight 2 oz
Dimensions 5 × 5 × 3 in
Switch Action

On-Off

Vehicle

Toyota

Switch LED Color

Amber, Blue, Green, Red, White

Switch Type

Square Push

Function

On-Off

Controls

Fog

Voltage

12V 3A (Push Toyota)

Compatibility

OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Fog Lights Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.

You Might Also Need