Blank Small Push Switch for Toyota | No Symbol | CH4x4

CH4X4 Small Push Switch for Toyota – Blank (No Symbol)

$23.98

This Blank Small Push Switch has a smooth, unmarked face with no laser-etched symbol, text or graphic. It uses latching SPST ON/OFF operation in the same 32.5 × 22 mm format as the Small Push series. Compatible with listed Toyota models; rated 12V 3A with dual LEDs. Fused relay required.

Switch LED Color

Clear

Description
Additional information

The Blank Small Push Switch offers the Small Push format with a plain face. There is no graphic, symbol or text engraved into the surface. Choose this version when the control does not need a preselected accessory label, or when an unmarked button best suits the panel layout.

A Blank Small Push Switch with a factory look

The smooth matte black finish and heavy-duty ABS plastic body give the button an OEM-style appearance. Its face measures 32.5 × 22 mm, approximately 1.28 × 0.87 inches. Match the existing opening to the Small Push format before installation. This is an operating switch, not a blank cover for an unused panel opening.

ON/OFF operation and illumination

The Single Pole Single Throw (SPST) switch uses latching ON/OFF action. Press to turn it ON and press again to turn it OFF; it remains in the selected state between presses. The upper LED lights when the switch is pressed in. The lower LED can be connected to a separate dash-light circuit.

The Blank Small Push Switch leaves the face unmarked while retaining those two LED functions. Plan how the control will be identified in your installation, particularly when several plain buttons sit together.

Electrical rating and installation

This electronic switch is rated at 3A, 12V. In ALL cases, the accessory MUST be wired through a fused relay. Use the supplied wiring diagram and follow the connected accessory requirements.

Package contents

One blank-face Small Push switch and one connector with cable are included, together with a wiring diagram.

Compatible with Toyota vehicles

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–ON
Toyota Corolla 2006–2013
Toyota Highlander 2008–ON
Toyota RAV4 2008–2012
Toyota Yaris 2008
Toyota Camry 2011–2014

For applications marked ON, verify the exact year and panel opening. See the Small Push Series for other designs and Toyota owner manuals for vehicle reference information.

Weight	2 oz
Dimensions	5 × 5 × 3 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4X4 Small Push Switch for Toyota – Blank (No Symbol) is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.