Tacoma Bumper Light Bar Small Push Switch | CH4x4

CH4x4 Small Push Switch for Toyota Tacoma 3rd Gen – Bumper Light Bar Symbol

$23.98

Give a bumper-mounted light bar a dedicated control with the Tacoma Bumper Light Bar Small Push switch. Its laser-etched Tacoma graphic is aimed at Tacoma interiors while the same switch fits all listed Toyota applications. Latching SPST ON/OFF, 12V 3A, 32.5 × 22 mm face and dual LEDs. Fused relay required.

Switch LED Color

Clear

Description
Additional information

The Tacoma Bumper Light Bar Small Push switch pairs a Tacoma vehicle graphic with a label for the bumper-mounted bar. It is designed with Tacoma owners in mind, offering a factory look for a dedicated auxiliary-light control in a matching panel opening.

Tacoma Bumper Light Bar identification in the cabin

The artwork distinguishes this control from roof-mounted bars or other front-light circuits. The Tacoma drawing is the visual theme; it does not limit physical compatibility to Tacoma. This model is compatible with Toyota vehicles in the full list below, using the same Small Push dimensions and electrical specifications.

Choose the Tacoma Bumper Light Bar design when that label matches the accessory being controlled. The package supplies the panel switch and connector rather than the lighting assembly. Match the face dimensions to the available opening and plan the relay wiring before installation.

Switch specifications

Single Pole Single Throw (SPST), latching ON/OFF: press for ON, press again for OFF.
Electronic switch rated at 3A, 12V, with short-circuit protection.
32.5 × 22 mm face, approximately 1.28 × 0.87 inches.
Heavy-duty ABS plastic with a matte black hard surface.
Laser-etched graphic and legend.
Upper LED is ON when the switch is pressed in.
Lower LED can be connected to a separate dash-light circuit.

In ALL cases, the accessory MUST be wired through a fused relay. Follow the supplied diagram and the accessory wiring requirements.

Included hardware

One Small Push ON/OFF switch, one connector with cable and a supplied wiring diagram.

Compatible with Toyota vehicles

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–ON
Toyota Corolla 2006–2013
Toyota Highlander 2008–ON
Toyota RAV4 2008–2012
Toyota Yaris 2008
Toyota Camry 2011–2014

For applications marked ON, verify the exact year and panel opening. See the Small Push Series for other designs and Toyota owner manuals for vehicle reference information.

Weight	2 oz
Dimensions	N/A
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Controls	Light Bar
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota
Series	Square Tacoma
Toyota Model	Tacoma 3rd Gen (2016-2023)

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota Tacoma 3rd Gen - Bumper Light Bar Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Purpose-built to slot into the factory-style dash opening on Toyota Tacoma applications, no cutting or adapters needed.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

Will this switch fit my Toyota Tacoma?

Yes — this switch is categorized under our Toyota Tacoma lineup and matches that application's factory-style dash opening.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.