The Horn Symbol 2 momentary Small Push switch places a dedicated horn label in a matching factory panel opening. This is the CH4X4-TOY-MOM-HOR2-SML design, with a laser-etched legend on a matte black face. It is compatible with Toyota applications listed below and brings a factory look to an added control.
Horn Symbol 2: press, hold and release
The Single Pole Single Throw (SPST) ON/OFF action is momentary. Hold the button in to keep the switch ON; releasing it returns the switch to OFF. There is no retained ON position. That behavior lets the operator determine the duration of the control signal directly at the button.
Build and illumination
Heavy-duty ABS plastic supports a black hard-surface face measuring 32.5 × 22 mm, approximately 1.28 × 0.87 inches. The marking is laser etched directly into the surface. One upper LED lights when the button is pressed in, while a separate lower LED can connect to the dash-light circuit.
Compare the Horn Symbol 2 design shown in the product gallery with the other horn designs in the series before choosing your button.
Electrical rating and relay requirement
Rated at 3A, 12V, with short-circuit protection. In ALL cases, the accessory MUST be wired through a fused relay. Follow the supplied wiring diagram and the connected equipment instructions.
Included in the package
One momentary Small Push switch, one connector with cable and a supplied wiring diagram.
Compatible with Toyota vehicles
- Toyota Tacoma 2012–2023 (Center Console ONLY)
- Toyota Tundra 2008–2021
- Toyota 4Runner 2010–2024
- Toyota Land Cruiser Prado 150 Series 2010–2014
- Toyota Land Cruiser 200 Series 2008–2013
- Toyota Sequoia 2008–ON
- Toyota Corolla 2006–2013
- Toyota Highlander 2008–ON
- Toyota RAV4 2008–2012
- Toyota Yaris 2008
- Toyota Camry 2011–2014
For entries marked ON, verify the exact model year and panel opening before ordering. Browse the Small Push Series for other labels. Vehicle reference information is available in Toyota owner manuals.
