CH4x4 Momentary Small Push Switch for Toyota – Battery Link Symbol

$23.98

The Battery Link Symbol button provides a labeled momentary input for a suitable battery-link control circuit. SPST ON/OFF operation is ON while held and OFF when released. OEM-style Small Push face: 32.5 × 22 mm. Rated 12V 3A, with dual LEDs; a fused relay is required.

Switch LED Color

Clear

Description
Additional information

Place a battery-link control input in a matching dashboard opening with the Battery Link Symbol Small Push switch. The laser-etched label identifies its intended control function, while the matte black finish keeps the cabin appearance consistent. It is compatible with Toyota vehicles and locations in the fitment list.

Battery Link Symbol momentary input

The switch is SPST ON/OFF with momentary action: it is ON during a press-and-hold and OFF after release. It does not retain the ON position. Confirm that the battery-link equipment accepts this input behavior when planning the system.

This Battery Link Symbol 12V 3A electronic button belongs in the control circuit. The label does not turn it into a battery isolator or a device for carrying battery-link current. Follow the connected equipment requirements and use the supplied wiring diagram to identify the switch connections.

Factory look and dual illumination

A 32.5 × 22 mm face, approximately 1.28 × 0.87 inches, fits the Small Push format. Heavy-duty ABS plastic forms the black hard surface. The upper LED is ON when pressed in; the lower LED can be wired to a separate dash-light circuit.

Electrical rating and relay requirement

Rated at 3A, 12V, with short-circuit protection. In ALL cases, the accessory MUST be wired through a fused relay. Follow the supplied wiring diagram and the connected equipment instructions.

Included in the package

One momentary Small Push switch, one connector with cable and a supplied wiring diagram.

Compatible with Toyota vehicles

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–ON
Toyota Corolla 2006–2013
Toyota Highlander 2008–ON
Toyota RAV4 2008–2012
Toyota Yaris 2008
Toyota Camry 2011–2014

For entries marked ON, verify the exact model year and panel opening before ordering. Browse the Small Push Series for other labels. Vehicle reference information is available in Toyota owner manuals.

Weight	2 oz
Dimensions	5 × 5 × 2 in
Switch Action	Momentary
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	Momentary
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Momentary Small Push Switch for Toyota – Battery Link Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a Momentary switch — it only stays active while you hold it and springs back off, ideal for horns, winches, and anything you only want on for a moment.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.