The Rear Camera Symbol 2 push switch gives a compatible camera-control installation a clearly marked panel position. Use the Symbol 2 design to distinguish the rear-camera circuit from nearby lighting or general accessory controls while keeping a factory look.
Rear Camera Symbol 2 circuit planning
Check the camera and display manufacturer’s instructions before selecting a control arrangement. This electronic Single Pole Single Throw ON/OFF switch is rated at 3A at 12V and includes short circuit protection. It does not process video or establish compatibility with a factory camera interface.
The accessory MUST be wired through a fused relay in ALL cases. The camera’s supply voltage and control-input requirements must be checked separately; a 12V switch specification does not mean every camera accepts a 12V feed.
Two LEDs for the switch position
The upper LED turns on when the button is pressed IN. Connect the lower LED to a separate dash-light circuit if desired, following the supplied diagram. The upper light indicates the button’s state, not confirmation that the rear view is being displayed.
Size and construction
- Small Push face: 32.5 × 22 mm, approximately 1.28 × 0.87 inches.
- Heavy-duty ABS body and matte black hard face.
- Laser-etched Rear Camera Symbol 2 legend.
- OEM-style format for the listed mounting locations.
Compatible with Toyota applications
Confirm the opening and model year before installation. Tacoma fitment is limited to the center console. For entries marked ON, verify your exact year and switch opening before ordering.
- Toyota Tacoma 2012–2023 (Center Console ONLY)
- Toyota Tundra 2008–2021
- Toyota 4Runner 2010–2024
- Toyota Land Cruiser Prado 150 Series 2010–2014
- Toyota Land Cruiser 200 Series 2008–2013
- Toyota Sequoia 2008–ON
- Toyota Corolla 2006–2013
- Toyota Highlander 2008–ON
- Toyota RAV4 2008–2012
- Toyota Yaris 2008
- Toyota Camry 2011–2014
Included components and design alternatives
The package provides one Small Push ON/OFF switch and one connector with cable, with a wiring diagram supplied. A camera and display are not part of the listed package.
Compare Rear Camera Symbol 3 if you prefer another legend. Consult the relevant Toyota owner’s manual for original vehicle-control information when planning the installation.
