CH4x4 Small Push Switch for Toyota – Pirate Lights Symbol 2

$23.98

Choose Pirate Lights Symbol 2 when this artwork suits your lighting-control position. The 32.5 × 22 mm Small Push button pairs a matte black factory look with dual LEDs and 12V 3A ON/OFF operation for listed Toyota applications; the accessory must use a fused relay.

Switch LED Color

Clear

Description
Additional information

Pirate Lights Symbol 2 is an alternate pirate-themed button design for a vehicle accessory panel. Its laser-etched legend marks the circuit you assign to it, and the matte black face provides an OEM-style finish.

Start with fitment, then choose the artwork

The Small Push face measures 32.5 × 22 mm, approximately 1.28 × 0.87 inches. Before selecting the design, confirm the available opening and the model year. The Tacoma application is for the center console only.

Compatible with Toyota models listed

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–2014
Toyota Corolla 2006–2013
Toyota Camry 2011–2014

Pirate Lights Symbol 2 operating details

This is an electronic 12V 3A Single Pole Single Throw ON/OFF switch with short circuit protection. Heavy-duty ABS construction supports a matte black hard face with the legend laser etched directly onto it.

The upper LED illuminates when the button is pressed IN. A lower LED can connect to a separate dash-light circuit. Follow the supplied diagram for these connections; the two lights have different roles in switch indication and panel illumination.

How this design fits your panel

Pirate Lights Symbol 2 identifies the artwork selection, not a special lighting effect. Compare the unnumbered Pirate Lights design and Symbol 4 if you are deciding which legend to use. Choose a position where the assigned accessory function is clear to the driver.

Connections and package contents

The accessory MUST be wired through a fused relay in ALL cases. Select the fuse, relay and load wiring to match the actual equipment, and use the supplied switch diagram for the button connections.

The package includes one Small Push ON/OFF switch and one connector with cable, with a wiring diagram supplied. Consult the relevant Toyota owner’s manual for the locations and functions of original vehicle controls before adding this themed button.

Weight	2 oz
Dimensions	5 × 5 × 2 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Pirate Lights Symbol 2 is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.