CH4x4 Small Push Switch for Toyota – Phone Charger Symbol

$23.98

The Phone Charger legend labels a suitable charging-system power-control circuit. This is a Small Push switch, not a charging port: its 32.5 × 22 mm face carries two LEDs and laser-etched marking. Rated 12V 3A ON/OFF; use a fused relay.

Switch LED Color

Clear

Description
Additional information

The Phone Charger push switch gives a suitable accessory charging installation a dedicated ON/OFF button. Separate charging hardware must provide the phone connection and charging output; this item supplies the marked panel control.

Phone Charger circuit requirements

Check the separate charger’s supply and control-input specifications before wiring. The electronic Single Pole Single Throw switch is rated at 3A at 12V, with short circuit protection. That switch rating is not a phone-charging output or charging-speed specification.

The accessory MUST be wired through a fused relay in ALL cases. Follow the supplied switch diagram and the charger manufacturer’s instructions when arranging the installation.

Illumination versus charging status

The upper LED is ON with the button pressed IN. It shows switch position rather than the phone’s battery or charging state. The lower LED may connect to a separate dash-light circuit.

Small Push face and materials

A laser-etched Phone Charger legend sits on a matte black hard face measuring 32.5 × 22 mm, approximately 1.28 × 0.87 inches. The heavy-duty ABS body and OEM-style format suit a factory-look panel.

Compatible with Toyota mounting applications

Verify the vehicle year and switch opening. Tacoma installation is center console only. For entries marked ON, check the exact year and available space before purchase.

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–ON
Toyota Corolla 2006–2013
Toyota Highlander 2008–ON
Toyota RAV4 2008–2012
Toyota Yaris 2008
Toyota Camry 2011–2014

Supplied with your order

The package includes one Small Push ON/OFF switch and one connector with cable, with a wiring diagram supplied.

A charger, charging cable, voltage converter and fused relay are not listed package contents. Explore the Small Push series for other accessory labels. Consult the applicable Toyota owner’s manual when identifying original vehicle controls.

Weight	2 oz
Dimensions	5 × 5 × 3 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Phone Charger Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.