Skip to content

CH4x4 Small Push Switch for Toyota – Off-Road Lights Symbol 5

$23.98

Select Off-Road Lights Symbol 5 for this alternate lighting legend on a compact Small Push control. A matte black OEM-style face, dual LEDs and 12V 3A ON/OFF switching fit the listed Toyota applications in a 32.5 × 22 mm format; the accessory requires a fused relay.

Off-Road Lights Symbol 5 offers another artwork choice for identifying a lighting accessory circuit. The matte black finish keeps a factory look, while the laser-etched legend gives the button a defined role among your other controls.

Confirm the opening before ordering

This Small Push face measures 32.5 × 22 mm, approximately 1.28 × 0.87 inches. Check the mounting space and model year together. The OEM-style appearance does not establish fit in every dashboard or console blank.

Compatible with Toyota applications listed

  • Toyota Tacoma 2012–2023 (Center Console ONLY)
  • Toyota Tundra 2008–2021
  • Toyota 4Runner 2010–2024
  • Toyota Land Cruiser Prado 150 Series 2010–2014
  • Toyota Land Cruiser 200 Series 2008–2013
  • Toyota Sequoia 2008–2014
  • Toyota Corolla 2006–2013
  • Toyota Camry 2011–2014

The Tacoma listing is restricted to the center console. Keep that position requirement when laying out your added lighting switches.

Off-Road Lights Symbol 5 specifications

  • 12V 3A electronic switch with short circuit protection.
  • Single Pole Single Throw ON/OFF action.
  • Heavy-duty ABS construction and matte black hard face.
  • Laser-etched legend.
  • Upper LED illuminates with the button pressed IN.
  • Lower LED can connect to a separate dash-light circuit.

Artwork selection and circuit planning

Off-Road Lights Symbol 5 identifies the design, not a different lighting output. Compare the Symbol 4 version if you are deciding between legends. Review the product images and choose the one that makes sense for the circuit you intend to control.

The accessory MUST be wired through a fused relay in ALL cases. Size the relay, fuse and load wiring for the lamps being installed. This button supplies ON/OFF control; the lamps determine their beam pattern and brightness.

Supplied with the switch

The package contains one Small Push ON/OFF switch and one connector with cable, with a wiring diagram supplied. Follow that diagram for the switch and its two LED connections.

Browse the Small Push Series for other labels to complete the panel. Consult the applicable Toyota owner’s manual for original vehicle-control information while planning where the Off-Road Lights Symbol 5 button will sit.

Weight 2 oz
Dimensions 5 × 5 × 2 in
Switch Action

On-Off

Vehicle

Toyota

Switch LED Color

Amber, Blue, Green, Red, White

Switch Type

Square Push

Function

On-Off

Controls

Off-Road Light

Voltage

12V 3A (Push Toyota)

Compatibility

OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Off-Road Lights Symbol 5 is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.

You Might Also Need