The Horn Symbol momentary Small Push switch offers a dedicated push-button control in the CH4X4-TOY-MOM-HOR-SML design. Its OEM-style face sits in a matching existing panel opening, giving a horn control a factory look without an unrelated accessory label.
Using the Horn Symbol button
A press closes the Single Pole Single Throw (SPST) ON/OFF switch. Keep it held for an ON signal, then release it to return to OFF. This momentary action gives direct control over how long the input is active. The button does not latch or hold an ON position after your finger is removed.
Face, finish and LEDs
- Face size: 32.5 × 22 mm, approximately 1.28 × 0.87 inches.
- Heavy-duty ABS plastic with a matte black hard surface.
- Legend laser etched directly into the switch face.
- One upper LED, ON while the button is pressed in.
- One lower LED, which can use a separate dash-light circuit.
For the Horn Symbol model, check both the available panel opening and the horn circuit requirements. Vehicle fitment refers to the listed panel applications; the control wiring must also match the equipment being installed.
Electrical rating and relay requirement
Rated at 3A, 12V, with short-circuit protection. In ALL cases, the accessory MUST be wired through a fused relay. Follow the supplied wiring diagram and the connected equipment instructions.
Included in the package
One momentary Small Push switch, one connector with cable and a supplied wiring diagram.
Compatible with Toyota vehicles
- Toyota Tacoma 2012–2023 (Center Console ONLY)
- Toyota Tundra 2008–2021
- Toyota 4Runner 2010–2024
- Toyota Land Cruiser Prado 150 Series 2010–2014
- Toyota Land Cruiser 200 Series 2008–2013
- Toyota Sequoia 2008–ON
- Toyota Corolla 2006–2013
- Toyota Highlander 2008–ON
- Toyota RAV4 2008–2012
- Toyota Yaris 2008
- Toyota Camry 2011–2014
For entries marked ON, verify the exact model year and panel opening before ordering. Browse the Small Push Series for other labels. Vehicle reference information is available in Toyota owner manuals.
