The 4Runner Dually Lights Small Push switch pairs a laser-etched vehicle graphic with a dedicated lighting legend. Mark the dually-light circuit with a matching 4Runner design.
4Runner Dually Lights: A recognizable dually-light button
A dedicated legend helps distinguish this button from controls for light bars or rear lamps. Choose it to match the terminology of your lighting setup; the switch does not determine the number or output of the lamps.
The vehicle graphic favors a 4Runner build while retaining the standard Small Push fit across the complete Toyota list.
Its matte black ABS face provides an OEM-style finish and factory look. Press once for ON and again for OFF. Before installation, compare the available panel opening with the 32.5 × 22 mm face and follow the supplied wiring diagram.
Compatible with Toyota vehicles
- Toyota Tacoma 2012–2023 (Center Console ONLY)
- Toyota Tundra 2008–2021
- Toyota 4Runner 2010–2024
- Toyota Land Cruiser Prado 150 Series 2010–2014
- Toyota Land Cruiser 200 Series 2008–2013
- Toyota Sequoia 2008–ON
- Toyota Corolla 2006–2013
- Toyota Highlander 2008–ON
- Toyota RAV4 2008–2012
- Toyota Yaris 2008
- Toyota Camry 2011–2014
For applications marked ON, verify the exact year and panel opening. See the Small Push Series for other designs and Toyota owner manuals for vehicle reference information.
4Runner Dually Lights switch specifications
- Single Pole Single Throw (SPST), latching ON/OFF: press for ON, press again for OFF.
- Electronic switch rated at 3A, 12V, with short-circuit protection.
- 32.5 × 22 mm face, approximately 1.28 × 0.87 inches.
- Heavy-duty ABS plastic with a matte black hard surface.
- Laser-etched graphic and legend.
- Upper LED is ON when the switch is pressed in.
- Lower LED can be connected to a separate dash-light circuit.
In ALL cases, the accessory MUST be wired through a fused relay. Follow the supplied diagram and the accessory wiring requirements.
Included hardware
One Small Push ON/OFF switch, one connector with cable and a supplied wiring diagram.
