CH4x4 Gray Series Momentary Rocker Switch Winch IN-OUT Symbol – 12V/24V Twin-Light Laser-Etched Momentary Switch

CH4x4 Gray Series Momentary Rocker Switch Winch IN-OUT Symbol – 12V/24V Twin-Light Laser-Etched Momentary Switch

$21.98

CH4x4 Gray Series Momentary Rocker Switch Winch IN-OUT Symbol is a double throw momentary switch designed to operate your 12 volt 4WD Winch.

Switch LED Color

Clear

Description
Additional information

Built as a double-throw momentary switch, the Gray Series Momentary Rocker Switch Winch IN-OUT returns to center on its own and is designed for quick, on-demand 12 volt accessory control.

The design is laser etched directly into the switch face for a clean, professional look that lasts — no stickers or printed graphics that peel or wear away.

Twin Light Indicator

Lighting is position-based rather than a simple ON state:

Upper lights turn ON when the switch is pressed UP
Lower light turns ON when the switch is pressed DOWN
Springs back to center automatically, lights off, when released

Features

Double Pole Double Throw Momentary switch
Gray hard-surface rocker body
Laser-etched design, never a sticker
Twin incandescent indicator lights
Rated 20A at 12V / 10A at 24V
Carling / Contura V-style mounting format
Snap-in panel installation, no rear terminal barriers
Wiring diagram included
Works across automotive, 4×4, truck, UTV, ATV, RV, and marine builds

Dimensions

Switch Face: 2" x 1" (50mm x 25mm)
Mounting Cutout: 0.86" x 1.46" (22mm x 37mm)

Note: Note: this switch is a universal aftermarket part, not a direct factory replacement. Always verify your mounting opening before ordering — a switch panel or adapter may be required for some installs.

Weight	2 oz
Dimensions	5 × 5 × 2 in
Series	Gray
Switch Action	Momentary
Vehicle	Symbol Designs
Switch LED Color	White
Switch Type	Rocker
Function	Momentary
Controls	Winch
Voltage	12V 20A, 24V 10A
Compatibility	Carling, Contura V
Orientation	Vertical

Built For Real-World Use

Every CH4x4 Gray Series Momentary Rocker Switch Winch IN-OUT Symbol – 12V/24V Twin-Light Laser-Etched Momentary Switch is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. A universal-fit switch — not vehicle-specific — so it drops into any standard 12V dash opening.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a Momentary switch — it only stays active while you hold it and springs back off, ideal for horns, winches, and anything you only want on for a moment.

What vehicles is this switch compatible with?

This is a universal-fit switch — it's not vehicle-specific, so it works in any 12V application with a matching dash cutout.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.