CH4x4 Small Push Switch for Toyota – Radio Symbol

$22.98

Mark a suitable radio power-control circuit with the Radio Symbol Small Push button. Its matte black 32.5 × 22 mm laser-etched face includes upper and lower LEDs. Verify the radio’s input requirements; the 12V 3A ON/OFF switch requires a fused relay.

Switch LED Color

Clear

Description
Additional information

The Radio Symbol push switch identifies a suitable radio power-control position in your accessory panel. Use the marked button to separate that circuit from lighting or other equipment while maintaining a factory look.

Radio Symbol control planning

Check the radio manufacturer’s supply and control requirements before wiring. This electronic Single Pole Single Throw ON/OFF switch is rated at 3A at 12V and includes short circuit protection. It is not a radio, audio source selector or volume control.

The accessory MUST be wired through a fused relay in ALL cases. Use the supplied switch diagram together with the radio equipment’s instructions. The label alone does not guarantee compatibility with an original vehicle radio harness.

Panel-light connections

The upper LED turns ON when the button is pressed IN. The lower LED may be wired to a separate dash-light circuit. These lights indicate the button state and panel location, not reception, audio output or radio status.

Size and materials

The OEM-style face measures 32.5 × 22 mm, approximately 1.28 × 0.87 inches. Its Radio Symbol legend is laser etched into a matte black hard surface, with a heavy-duty ABS body.

Compatible with Toyota mounting applications

Verify the opening and model year. Tacoma fitment is center console only. Confirm the exact year and available switch space for entries marked ON.

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–ON
Toyota Corolla 2006–2013
Toyota Highlander 2008–ON
Toyota RAV4 2008–2012
Toyota Yaris 2008
Toyota Camry 2011–2014

Included components

The package includes one Small Push ON/OFF switch and one connector with cable, with a wiring diagram supplied.

A radio, antenna, interface module and fused relay are not listed as included. Browse other Small Push panel controls to coordinate the layout. The relevant Toyota owner’s manual provides information about original vehicle controls.

Weight	2 oz
Dimensions	5 × 5 × 3 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Radio Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.