CH4x4 Small Push Switch for Toyota – Winch Power Symbol

$23.98

The Winch Power Symbol 2 listing uses SKU CH4X4-TOY-WPW2-SML. Its 32.5 × 22 mm laser-etched face and dual LEDs mark a suitable winch power-control circuit. This 12V 3A ON/OFF switch requires a fused relay and is not an IN/OUT directional controller.

Switch LED Color

Clear

Description
Additional information

The Winch Power Symbol 2 Small Push listing provides a marked ON/OFF button for a suitable winch power-control installation. SKU CH4X4-TOY-WPW2-SML identifies this design when comparing similar winch legends.

Winch Power Symbol 2 circuit checks

Verify the winch or controller manufacturer’s input requirements before installation. This electronic Single Pole Single Throw switch is rated at 3A at 12V and includes short circuit protection. It does not provide IN/OUT direction commands or replace the winch’s operating controller.

The accessory MUST be wired through a fused relay in ALL cases. Winch motor current must not pass through the Small Push button. Use the supplied switch diagram and the connected system’s instructions when planning the control circuit.

LED indication

The upper LED is ON when the button is pressed IN. It shows switch position, not winch movement or system condition. The lower LED may be connected to a separate dash-light circuit.

Physical details

The 32.5 × 22 mm face, approximately 1.28 × 0.87 inches, has a laser-etched legend and matte black hard surface. A heavy-duty ABS body supports the OEM-style factory look.

Compatible with Toyota mounting applications

Check the year and opening. Tacoma fitment is center console only. For entries marked ON, confirm the exact year and switch space before ordering.

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–ON
Toyota Corolla 2006–2013
Toyota Highlander 2008–ON
Toyota RAV4 2008–2012
Toyota Yaris 2008
Toyota Camry 2011–2014

Parts supplied

The package includes one Small Push ON/OFF switch and one connector with cable, with a wiring diagram supplied.

A winch, controller and fused relay are not listed as included. Select the Winch Power Symbol 2 design from this product’s gallery, or compare other Small Push legends. Refer to the relevant Toyota owner’s manual for original vehicle-control information.

Weight	2 oz
Dimensions	5 × 5 × 3 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Controls	Winch
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Winch Power Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.