Skip to content

CH4x4 Small Push Switch for Toyota Tacoma 3rd Gen – Ditch Lights Symbol

$23.98

Identify a ditch-light circuit with a Tacoma-themed Tacoma Ditch Lights Symbol button. The graphic is tailored to Tacoma owners; fitment still covers all listed Toyota models. This 32.5 × 22 mm Small Push switch uses latching SPST ON/OFF action, dual LEDs and a 12V 3A rating. Fused relay required.

The Tacoma Ditch Lights Symbol Small Push switch brings Tacoma artwork to a labeled auxiliary-light control. It offers a clear way to separate ditch lighting from a light bar or other accessory circuit in the dashboard. The OEM-style face keeps the additional control visually consistent with the panel.

Tacoma Ditch Lights Symbol with Tacoma artwork

The Tacoma drawing is intended to complement that truck, while the physical switch remains compatible with Toyota vehicles listed below. Selecting this graphic does not change its size, ON/OFF operation or electrical rating. Use the complete fitment list when checking another supported vehicle.

Plan the Tacoma Ditch Lights Symbol button location alongside the other controls you use. The switch provides a labeled electrical control; the lights, mounting hardware and accessory circuit are separate installation components. Confirm the available Small Push opening and follow the supplied switch diagram.

Switch specifications

  • Single Pole Single Throw (SPST), latching ON/OFF: press for ON, press again for OFF.
  • Electronic switch rated at 3A, 12V, with short-circuit protection.
  • 32.5 × 22 mm face, approximately 1.28 × 0.87 inches.
  • Heavy-duty ABS plastic with a matte black hard surface.
  • Laser-etched graphic and legend.
  • Upper LED is ON when the switch is pressed in.
  • Lower LED can be connected to a separate dash-light circuit.

In ALL cases, the accessory MUST be wired through a fused relay. Follow the supplied diagram and the accessory wiring requirements.

Included hardware

One Small Push ON/OFF switch, one connector with cable and a supplied wiring diagram.

Compatible with Toyota vehicles

  • Toyota Tacoma 2012–2023 (Center Console ONLY)
  • Toyota Tundra 2008–2021
  • Toyota 4Runner 2010–2024
  • Toyota Land Cruiser Prado 150 Series 2010–2014
  • Toyota Land Cruiser 200 Series 2008–2013
  • Toyota Sequoia 2008–ON
  • Toyota Corolla 2006–2013
  • Toyota Highlander 2008–ON
  • Toyota RAV4 2008–2012
  • Toyota Yaris 2008
  • Toyota Camry 2011–2014

For applications marked ON, verify the exact year and panel opening. See the Small Push Series for other designs and Toyota owner manuals for vehicle reference information.

Weight 2 oz
Dimensions 5 × 5 × 2 in
Switch Action

On-Off

Vehicle

Toyota

Switch LED Color

Amber, Blue, Green, Red, White

Switch Type

Square Push

Function

On-Off

Voltage

12V 3A (Push Toyota)

Compatibility

OEM Toyota

Series

Square Tacoma

Toyota Model

Tacoma 3rd Gen (2016-2023)

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota Tacoma 3rd Gen - Ditch Lights Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Purpose-built to slot into the factory-style dash opening on Toyota Tacoma applications, no cutting or adapters needed.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

Will this switch fit my Toyota Tacoma?

Yes — this switch is categorized under our Toyota Tacoma lineup and matches that application's factory-style dash opening.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.

You Might Also Need