CH4X4 push switch for Toyota FJ Cruiser rear lights – Rear Lights Symbol, FJ Cruiser graphic

CH4X4 Push Switch for Toyota FJ Cruiser – Rear Lights Symbol

$23.98

Rear Lights Symbol provides a general label for rear auxiliary lighting. The FJ Cruiser graphic suits a coordinated panel, with manual latching ON/OFF operation.

39 × 21 mm Large Push face; 3A at 12V. Compatible with the same vehicles as the regular Large Push series, not only the FJ Cruiser. A fused relay is required in ALL installations. Relay sold separately.

Switch LED Color

Clear

Description
Additional information

Bring an added rear-light circuit under clearly labeled manual control with the CH4X4 push switch for Toyota FJ Cruiser rear lights. This Rear Lights Symbol design offers a broader rear-lighting label for an FJ Cruiser-themed dashboard.

Where the FJ Cruiser graphic fits

Choose the FJ Cruiser artwork for the look of your panel. Underneath that engraving is the regular CH4X4 Large Push switch, with the same technical specifications and vehicle compatibility. Owners of the other listed vehicles can use this design too, provided their dash opening and mounting location match the Large Push format.

Rear Lights Symbol for a flexible panel label

Choose this artwork when you want to identify rear auxiliary lighting without naming a specific bumper or roof mounting point. The control remains a single SPST latching ON/OFF switch. It does not contain a reverse-gear trigger or combine separate rear-light circuits; those choices belong to the installation wiring.

Included with Rear Lights Symbol

1 CH4X4 Large Push latching ON/OFF switch.
1 connector with cable.
Wiring diagram supplied with the switch.

Lighting equipment and relay are sold separately. Follow the switch diagram and the accessory manufacturer’s instructions during installation.

Push switch for Toyota FJ Cruiser rear lights: specifications

Face size: 39 × 21 mm (approximately 1.54 × 0.83 inches). Verify the actual mounting opening separately.
Single Pole Single Throw (SPST), latching ON/OFF operation: press once for ON and again for OFF.
Electronic switch rated at 3A at 12V, with short circuit protection.
Heavy-duty ABS construction and a matte black hard surface for an OEM-style appearance.
Rear Lights Symbol with FJ Cruiser artwork, laser etched directly into the face.
Two LEDs: one upper indicator and one lower panel light.
Upper LED turns ON when the switch is pressed IN.
Lower LED can be wired to a separate dash-light circuit.

Wiring and installation — fused relay required

A fused relay is required in ALL installations. Do not power the accessory directly through this 3A, 12V switch. Route accessory power through a suitably rated relay circuit with appropriate fuse protection.

Follow the supplied wiring diagram and the accessory manufacturer’s instructions. The connector and cable provide the switch-side connection. The CH4X4 marine-grade waterproof 12V 40A relay with 4-pin harness is available separately. Have your installer confirm relay, wiring and fuse selection for the accessory load.

Compatible with Toyota vehicles

Check the model year, trim, market and actual dash opening before ordering. Observe the position restrictions shown for Tacoma and Tundra. This is a CH4X4 aftermarket product for Toyota applications.

Toyota Tacoma 2005–2011
Toyota Tacoma 2012–2015 (left side ONLY)
Toyota Tacoma 2016–2020 (left side ONLY)
Toyota FJ Cruiser 2007–2014
Toyota Fortuner 2005–2014
Toyota Hilux 2005–2014
Toyota Highlander 2001–2007
Toyota Tundra 2005–2006 (center console, if equipped)
Toyota 4Runner 2003–2009
Toyota Prado 120 Series 2003–2009
Toyota Land Cruiser 100 Series 1998–2007
Toyota Land Cruiser 75, 76, 78 and 79 Series

Weight	2 oz
Dimensions	5 × 5 × 3 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	White
Switch Type	Push
Function	On-Off
Controls	Rear Light
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4X4 Push Switch for Toyota FJ Cruiser – Rear Lights Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Purpose-built to slot into the factory-style dash opening on Toyota FJ Cruiser applications, no cutting or adapters needed.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

Will this switch fit my Toyota FJ Cruiser?

Yes — this switch is categorized under our Toyota FJ Cruiser lineup and matches that application's factory-style dash opening.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.