CH4x4 Small Push Switch for Toyota – Cruise Control Symbol

$23.98

The Cruise Control Symbol identifies this OEM-style Small Push button. Its 32.5 × 22 mm laser-etched face includes two LEDs, with electronic 12V 3A ON/OFF switching. Mounting fit does not confirm factory cruise-system compatibility; verify the intended interface and use a fused relay.

Switch LED Color

Clear

Description
Additional information

The Cruise Control Symbol Small Push switch is a marked ON/OFF button for an installation designed to accept its published electrical arrangement. The legend identifies the design; it does not make this item a complete cruise-control system or establish a direct factory interface.

Cruise Control Symbol: check the interface first

Confirm the intended controller’s input requirements before installation. This is an electronic Single Pole Single Throw ON/OFF switch, rated at 3A at 12V, with short circuit protection. It does not provide separate SET, RESUME or speed-adjustment commands.

The accessory MUST be wired through a fused relay in ALL cases. The supplied diagram describes the switch connections. Original vehicle cruise-control operation should be checked in the appropriate Toyota owner’s manual, independently of the button’s mounting fit.

LED operation

The upper LED is ON when the switch is pressed IN. It indicates the switch position, not whether the vehicle has engaged cruise control. The lower LED can be connected to a separate dash-light circuit.

OEM-style construction

32.5 × 22 mm face, approximately 1.28 × 0.87 inches.
Heavy-duty ABS body.
Matte black hard surface for a factory look.
Laser-etched Cruise Control Symbol legend.
One upper LED and one lower LED.

Compatible with Toyota mounting applications

Verify the year and opening. Tacoma fitment is center console only. For entries marked ON, check the exact year and switch space. This list does not establish compatibility with the original cruise-control electronics.

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–ON
Toyota Corolla 2006–2013
Toyota Highlander 2008–ON
Toyota RAV4 2008–2012
Toyota Yaris 2008
Toyota Camry 2011–2014

Parts in the package

One Toyota Small Push ON/OFF switch and one connector with cable are included, with a wiring diagram supplied. A cruise controller, interface module and fused relay are not listed package contents.

Browse the Small Push series for alternative legends when planning the intended accessory-control layout.

Weight	2 oz
Dimensions	5 × 5 × 3 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Cruise Control Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.