The CH4X4 Custom Large Push Switch for Toyota lets you create a clearly labeled control for your accessory panel. Combine a graphic in the upper area with up to 16 characters of your own text below it, then review your design before ordering. We laser-etch the design directly into the matte black switch face for an OEM-style appearance.
Use your design to identify a compatible relay-controlled circuit for auxiliary lights, an air compressor, communications equipment or another accessory. Personalization changes the graphic and wording; it does not change the switch’s electrical rating or vehicle compatibility.
Design your Custom Large Push Switch for Toyota
- Open Customize This Switch on the product page.
- Choose your graphic and enter up to 16 characters of text underneath it.
- Review the complete design, including spelling and readability.
- Select ON/OFF or Momentary operation and your LED color, then add the switch to your cart.
The Large Push layout allows an image above and text below on the same switch. The graphic identifies the accessory visually, while the wording gives its control a specific label.
Make the label useful
Choose wording that identifies the circuit you actually intend to operate, such as a particular light bar or auxiliary accessory. Short, clear labels help you recognize the control when several switches share the same panel.
The text limit is 16 characters. Check the design preview carefully before ordering. If you need artwork that is not available in the design tool, contact us first to discuss your requirements.
Choose ON/OFF or Momentary operation
The Custom Large Push Switch for Toyota offers two Single Pole Single Throw (SPST) options:
- ON/OFF (latching): press once to turn the switch circuit ON. It stays ON after you release the button; press again to turn it OFF.
- Momentary: press and hold to turn the switch circuit ON. Release the button and it returns to OFF.
Select the action required by the equipment you intend to control. The custom graphic labels your chosen function; it does not establish compatibility with an accessory’s electrical control system.
Laser-etched design and five LED colors
Your graphic and text are laser etched directly into the switch face, rather than applied as a sticker or decal.
The engraved design on your Custom Large Push Switch for Toyota has a white appearance on the matte black face. The illumination color is a separate selection: choose Amber, Blue, Red, Green or White.
The upper LED illuminates when the switch is activated. The lower LED can be connected to a separate dash-light circuit for panel illumination.
Custom Large Push Switch for Toyota: specifications
- Face dimensions: 39 × 21 mm, approximately 1.54 × 0.83 inches. This is the face size; verify the mounting opening separately.
- SPST operation: choose latching ON/OFF or Momentary.
- Electronic switch rated at 3A at 12V, with short circuit protection.
- Heavy-duty ABS construction with a matte black hard surface.
- Personalized upper graphic and up to 16 characters of text below, laser etched directly into the face.
- Two LEDs: an upper indicator and a lower panel light.
- LED color choices: Amber, Blue, Red, Green or White.
- Lower LED can be wired to a separate dashboard illumination circuit.
Wiring and installation — fused relay required
A fused relay is required in ALL installations, for both ON/OFF and Momentary versions. Do not power the accessory directly through this 3A, 12V switch.
Use the Custom Large Push Switch for Toyota in the appropriate relay control circuit, with accessory power routed through a suitably rated relay and appropriate fuse protection. Follow the supplied wiring diagram and the accessory manufacturer’s instructions.
The included connector and cable provide the switch-side connection; they are not a complete accessory wiring harness. The CH4X4 marine-grade waterproof 12V 40A relay with 4-pin harness is available separately. Have your installer confirm the relay, wiring and fuse selection for your equipment.
What is included
- 1 CH4X4 Custom Large Push Switch for Toyota, laser etched with your selected design and supplied in your chosen switch action and LED color.
- 1 connector with cable.
- Wiring diagram.
Relay and controlled accessory sold separately.
Vehicle compatibility
The Custom Large Push Switch for Toyota uses the same fitment as the regular CH4X4 Large Push series. Check the vehicle year, trim, market and actual dash opening before ordering, including the mounting-position restrictions below.
- Toyota Tacoma 2005-2011
- Toyota Tacoma 2012-2015 – left side ONLY
- Toyota Tacoma 2016-2020 – left side ONLY
- Toyota FJ Cruiser 2007-2014
- Toyota Fortuner 2005-2014
- Toyota Hilux 2005-2014
- Toyota Highlander 2001-2007
- Toyota Tundra 2005-2006 – center console, if equipped
- Toyota 4Runner 2003-2009
- Toyota Prado 120 Series 2003-2009
- Toyota Land Cruiser 100 Series 1998-2007
- Toyota Land Cruiser 75, 76, 78 and 79 Series
Both switch actions use the same vehicle compatibility list. This is a CH4X4 aftermarket switch for compatible Toyota applications.
Packaged shipping size and weight: The Dimensions and Weight shown under Additional information refer to the switch in its blister packaging: 5 × 5 × 3 in and 2 oz. For the switch face dimensions, see Switch Face Size.
Custom Large Push Switch for Toyota: frequently asked questions
Can I have a graphic and text on the same switch?
Yes. The Custom Large Push layout allows a graphic in the upper area and your personalized text underneath it.
How much text can I add?
You can enter up to 16 characters. Keep your label concise and review its appearance and spelling before ordering.
Can I upload my own image or logo?
Use the artwork options provided by the design tool. If your design is not available, contact us before ordering to discuss it.
What is the difference between ON/OFF and Momentary?
The ON/OFF version latches: press once for ON and again for OFF. The Momentary version is ON only while you hold the button and returns to OFF when released.
Which LED colors are available?
Amber, Blue, Red, Green and White. The LED selection determines the illumination color, separately from the white appearance of the engraved design.
Does customization change vehicle fitment?
No. The custom version retains the same dimensions and vehicle compatibility as the regular Large Push switch. Both ON/OFF and Momentary versions use the listed mounting applications.
What size is the switch?
The face measures 39 × 21 mm, approximately 1.54 × 0.83 inches. Check the actual mounting opening separately.
Do I need a relay for the momentary version too?
Yes. A properly rated fused relay is required in ALL installations for either version. The switch is rated at 3A at 12V and must not carry the accessory load directly.
