CH4x4 Square Push Switch for Toyota – Fog Lights Symbol

CH4x4 Square Push Switch for Toyota – Fog Lights Symbol - Image 2

CH4x4 Square Push Switch for Toyota – Fog Lights Symbol - Image 3

CH4x4 Square Push Switch for Toyota – Fog Lights Symbol - Image 4

CH4x4 Square Push Switch for Toyota – Fog Lights Symbol - Image 5

CH4x4 Square Push Switch for Toyota – Fog Lights Symbol - Image 6

CH4x4 Square Push Switch for Toyota – Fog Lights Symbol - Image 7

CH4x4 Square Push Switch for Toyota – Fog Lights Symbol

$23.98

Toyota Fog Lights Symbol switch with a laser-etched legend, 22 × 22 mm square face and dual LEDs. Maintained ON/OFF operation; choose Amber, Blue or White illumination.

3A at 12V. A fused relay is required. Check dash opening compatibility before ordering.

Switch LED Color

Clear

Description
Additional information

The CH4X4 Toyota Fog Lights Symbol square push switch identifies a fog-light relay control for a compatible accessory lighting circuit. It provides maintained ON/OFF switching and does not replace the vehicle lighting control module. Its matte black face offers an OEM-style appearance for a compatible Toyota dash opening.

Switch features

Fog Lights Symbol legend laser-etched directly into the switch face.
22 × 22 mm (0.86 × 0.86 in) square face; verify the dash opening before ordering.
SPST maintained ON/OFF operation: press to switch on, press again to switch off. This is not a momentary switch.
Heavy-duty ABS construction with a matte black finish.
Dual LEDs with a choice of Amber, Blue or White illumination.
The upper LED illuminates when the switch is pressed in; the lower LED can be wired to a separate dash-light circuit.
Rated at 3A at 12V for accessory control.

Wiring and installation

A fused relay is required in all installations. Do not power the accessory directly through this switch. Use the supplied wiring diagram and confirm compatibility with the accessory control circuit before connecting it.

The connector and wiring pigtail provide the switch-side connection; they are not a complete accessory wiring harness. A suitable 12V relay with 5-pin harness is available separately. Have a qualified installer check wiring, fuse protection and relay selection if needed.

What is included

1 CH4X4 Toyota Fog Lights Symbol square push switch.
1 connector with wiring pigtail.
Wiring diagram.

Vehicle fitment

Listed applications below are subject to the vehicle’s dash opening, trim and market. This aftermarket switch is not a Toyota OEM part; compare the opening and connector requirements before installation.

Toyota Tundra 2022+
Toyota Sequoia 2022+
Toyota Tacoma 2024+
Toyota 4Runner 2025+
Toyota Land Cruiser 300 Series 2022+
Toyota Prado 150 Series 08/2017 – 2023
Toyota Prado 250 Series 2024+
Toyota RAV4 / RAV4 Hybrid 2019+
Toyota Camry 70 Series 09/2017+
Toyota Hiace 2019+
Toyota Corolla 2018+

Weight	2 oz
Dimensions	5 × 5 × 3 in
Series	Symbol
Vehicle	Toyota
Switch LED Color	Amber, Blue, White
Switch Type	Square Push
Function	On-Off
Controls	Fog
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Square Push Switch for Toyota – Fog Lights Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.