CH4x4 Small Push Switch for Toyota – Skull Lights Symbol

$23.98

Add the Skull Lights design to your accessory panel with this matte black Small Push button. The laser-etched face is 32.5 × 22 mm, and two LEDs distinguish switch-state illumination from the separate dash-light connection. 12V 3A ON/OFF; a fused relay is required.

Switch LED Color

Clear

Description
Additional information

The Skull Lights push switch brings a distinctive legend to a suitable accessory-lighting circuit. Choose it for the panel design shown in the product gallery, with an OEM-style format compatible with the Toyota applications listed below.

The Skull Lights face

The design is laser etched into a matte black hard surface. A heavy-duty ABS body supports the Small Push format, whose face measures 32.5 × 22 mm, approximately 1.28 × 0.87 inches. This compact presentation keeps a factory look while distinguishing the selected accessory control.

The artwork does not change the switch’s electrical capacity. Select the circuit and installation hardware according to the connected lights, rather than the graphic on the button.

Electrical details at a glance

Electronic Single Pole Single Throw ON/OFF operation.
Rated at 3A at 12V.
Short circuit protection.
Upper LED turns ON when the button is pressed IN.
Lower LED can connect to a separate dash-light circuit.

Required relay connection

The accessory MUST be wired through a fused relay in ALL cases. Use the supplied wiring diagram for the switch connections and the accessory manufacturer’s instructions for the load circuit. The illuminated button indicates its own state; it does not verify that a connected lamp is working.

Vehicle fitment

Check your vehicle year and intended switch opening against this list. Tacoma compatibility is for the center console only.

Toyota Tacoma 2012–2023 (Center Console ONLY)
Toyota Tundra 2008–2021
Toyota 4Runner 2010–2024
Toyota Land Cruiser Prado 150 Series 2010–2014
Toyota Land Cruiser 200 Series 2008–2013
Toyota Sequoia 2008–2014
Toyota Corolla 2006–2013
Toyota Camry 2011–2014

Package contents

One Small Push ON/OFF switch and one connector with cable are included, with a wiring diagram supplied. The Skull Lights item is a control switch; lamps and a relay are not in the listed package.

Explore the Small Push switch range to finish your panel layout. Refer to the relevant Toyota owner’s manual for information about original vehicle controls.

Weight	2 oz
Dimensions	5 × 5 × 2 in
Switch Action	On-Off
Vehicle	Toyota
Switch LED Color	Amber, Blue, Green, Red, White
Switch Type	Square Push
Function	On-Off
Voltage	12V 3A (Push Toyota)
Compatibility	OEM Toyota

Built For Real-World Use

Every CH4x4 Small Push Switch for Toyota – Skull Lights Symbol is laser-etched directly into the switch face — not printed or stickered — so the design holds up to years of sun, wash bays, and trail use instead of fading or peeling off. Sized to the OEM-style dash opening used across Toyota applications.

Frequently Asked Questions

Is this switch On-Off or Momentary?

This is a On-Off switch — it latches in place and stays on until you flip it back off, ideal for lights and accessories you run continuously.

What vehicles is this switch compatible with?

This switch is built for Toyota applications.

Is the design laser-etched or a sticker?

Laser-etched, directly into the switch face — not a sticker or ink print, so the design won't fade, peel, or wear off over time.

What do I need to install this switch?

Just basic hand tools and simple 12V wiring — this switch drops into a standard dash opening and wires the same as any single-pole 12V accessory switch.