Organize winch control inputs with the Winch IN-OUT Symbol Small Push kit. The package contains two separate momentary buttons and two connectors with cables, allowing the labeled controls to occupy matching panel positions. Each switch has a 32.5 × 22 mm face, approximately 1.28 × 0.87 inches.
Two Winch IN-OUT Symbol controls
Each button is a Single Pole Single Throw (SPST) ON/OFF momentary switch. Its output remains ON only while the button is held, then returns OFF on release. These are two separate switches; the kit is not a single three-position rocker. Check the winch controller requirements and connection diagram when planning the control circuit.
OEM-style appearance in the cabin
Matte black heavy-duty ABS construction and laser-etched markings give the pair a factory look. Each black hard-surface button has an upper LED that is ON when pressed in. Each lower LED can use a separate dash-light circuit. The switches are compatible with Toyota panel locations specified below.
Plan space for both Winch IN-OUT Symbol buttons and identify each function before installation. The package supplies the panel controls, while the winch and its control equipment must be selected and wired for the intended system.
Electrical rating and relay requirement
Rated at 3A, 12V, with short-circuit protection. In ALL cases, the accessory MUST be wired through a fused relay. Follow the supplied wiring diagram and the connected equipment instructions.
Compatible with Toyota vehicles
- Toyota Tacoma 2012–2023 (Center Console ONLY)
- Toyota Tundra 2008–2021
- Toyota 4Runner 2010–2024
- Toyota Land Cruiser Prado 150 Series 2010–2014
- Toyota Land Cruiser 200 Series 2008–2013
- Toyota Sequoia 2008–ON
- Toyota Corolla 2006–2013
- Toyota Highlander 2008–ON
- Toyota RAV4 2008–2012
- Toyota Yaris 2008
- Toyota Camry 2011–2014
For entries marked ON, verify the exact model year and panel opening before ordering. Browse the Small Push Series for other labels. Vehicle reference information is available in Toyota owner manuals.
